Entitlements, coping mechanisms and indicators of access to food: wollo region, ethiopia, 1987-88

Vulnerability to famine and traditional responses to food insecurity in Wollo Region, Ethiopia are described. The timeliness of anthropometric and socio-economic indicators of access to food is then assessed, using data collected in Wollo by Save the Children Fund during 1987–88, a period of drought and subsequent food insecurity. The movements of different indicators are then examined for evidence of correspondence at sub-district level. The author concludes that although anthropometric status does not respond as early as crop yield or grain price, a deterioration in anthropometric status is detectable at a stage when livestock and migration indicators show little or no change and mortality rate remains unaffected. At sub-district level, changes in different indicators are not well-correlated.     

ESTIMATING REFERENCE EVAPORATION IN THE CENTRAL VALLEY OF CALIFORNIA USING THE LINACRE MODEL1

ABSTRACT: The Linacre (1988) model for calculating evaporation from open water or well-watered surfaces only requires inputs of air temperature, latitude and elevation, and windspeed if it is available. The model was developed using data collected at a large number of sites in different climatic regions of the world, while independent tests of the model have shown it to be suitable for estimating evaporation in a variety of locations. This study was intended to contribute to the broad goal of evaluating temperature-based evaporation models for use in California by testing the Linacre model in the agriculturally intensive Central Valley. Observed monthly mean reference evaporation (E_o) and meteorological data for periods ranging up to 72 months were obtained from 25 California Irrigation and Management Information System (CIMIS) stations distributed throughout the Central Valley. Uncalibrated and calibrated Linacre models were used to estimate monthly mean reference evaporation, and the performance of each model was evaluated using indices that quantified the random and systematic errors and overall model performance. The accuracy of the radiation and ventilation components of the model were evaluated separately. The uncalibrated model was found to systematically overestimate E_o with most of the model error being attributed to the ventilation component. Calibration of the radiation and ventilation components removed most of the systematic model errors, and the root mean square error for monthly mean E_o was 0.676 mm day^?1 (16.8 percent of the mean observed value). (KEY TERMS: reference evaporation; Linacre model; irrigation scheduling.)     

Trends in atmospheric ammonium concentrations in relation to atmospheric sulfate and local agriculture

Ammonium (NH(4)(+)) concentrations in air and precipitation at the Institute of Ecosystem Studies (IES) in southeastern New York, USA declined over an 11-year period from 1988 to 1999, but increased from 1999 to 2001. These trends in particulate NH(4)(+) correlated well with trends in particulate SO(4)(2-) over the 1988-2001 period. The NH(4)(+) trends were not as well correlated with local cattle and milk production, which declined continuously throughout the period. This suggests that regional transport of SO(4)(2-) may have a greater impact on concentrations of NH(4)(+) and subsequent deposition than local agricultural emissions of NH(3). Ammonium concentrations in precipitation correlated significantly with precipitation SO(4)(2-) concentrations for the 1984-2001 period although NH(4)(+) in precipitation increased after 1999 and SO(4)(2-) in precipitation continued to decline after 1999. The correlation between NH(4)(+) and SO(4)(2-) was stronger for particulates than for precipitation. Particulate NH(4)(+) concentrations were also correlated with particulate SO(4)(2-) concentrations at 31 of 35 eastern U.S. CASTNet sites that had at least 10 years of data. Air concentrations of NH(4)(+) and SO(4)(2-) were more strongly correlated at the sites that were located within an agricultural landscape than in forested sites. At most of the sites there was either no trend or a decrease in NH(4)(+) dry deposition during the 1988-2001 period. The sites that showed an increasing trend in NH(4)(+) dry deposition were generally located in the southeastern U.S. The results of this study suggest that, in the northeastern U.S., air concentrations of NH(4)(+) and subsequent deposition may be more closely linked to SO(4)(2-) and thus SO(2) emissions than with NH(3) emissions. These results also suggest that reductions in S emissions have reduced NH(4)(+) transport to and NH(4)(+)-N deposition in the Northeast.     

Effects of ceiling-mounted HEPA-UV air filters on airborne bacteria concentrations in an indoor therapy pool building

The purpose of this study was to assess the effectiveness of a new generation of high-volume, ceiling-mounted high-efficiency particulate air (HEPA)-ultraviolet (UV) air filters (HUVAFs) for their ability to remove or inactivate bacterial aerosol. In an environmentally controlled full-scale laboratory chamber (87 m3), and an indoor therapy pool building, the mitigation ability of air filters was assessed by comparing concentrations of total bacteria, culturable bacteria, and airborne endotoxin with and without the air filters operating under otherwise similar conditions. Controlled chamber tests with pure cultures of aerosolized Mycobacterium parafortuitum cells showed that the HUVAF unit tested provided an equivalent air-exchange rate of 11 hr(-1). Using this equivalent air-exchange rate as a design basis, three HUVAFs were installed in an indoor therapy pool building for bioaerosol mitigation, and their effectiveness was studied over a 2-year period. The HUVAFs reduced concentrations of culturable bacteria by 69 and 80% during monitoring periods executed in respective years. The HUVAFs reduced concentrations of total bacteria by 12 and 76% during the same monitoring period, respectively. Airborne endotoxin concentrations were not affected by the HUVAF operation.     

Sequestration of priority pollutant PAHs from sediment pore water employing semipermeable membrane devices

Semipermeable membrane devices (SPMDs) were employed to sample sediment pore water in static exposure studies under controlled laboratory conditions using (control pond and formulated) sediments fortified with 15 priority pollutant polycyclic aromatic hydrocarbons (PPPAHs). The sediment fortification level of 750 ng/g was selected on the basis of what might be detected in a sediment sample from a contaminated area. The sampling interval consisted of 0, 4, 7, 14, and 28 days for each study. The analytical methodologies, as well as the extraction and sample cleanup procedures used in the isolation, characterization, and quantitation of 15 PPPAHs at different fortification levels in SPMDs, water, and sediment were reported previously (Williamson, M.S. Thesis, University of Missouri-Columbia, USA; Williamson et al., Chemosphere (This issue--PII: S0045-6535(02)00394-6)) and used for this project. Average (mean) extraction recoveries for each PPPAH congener in each matrix are reported and discussed. No procedural blank extracts (controls) were found to contain any PPPAH residues above the method quantitation limit, therefore, no matrix interferences were detected. The focus of this publication is to demonstrate the ability to sequester environmental contaminants, specifically PPPAHs, from sediment pore water using SPMDs and two different types of fortified sediment.     

Kinetics of oxidation of methylhydrazines in water. Factors controlling the formation of 1,1-dimethylnitrosamine

The kinetics of oxidation of methylhydrazine ($\text{MMH}$) and 1,1-dimethylhydrazine ($\text{UDMH}$) by dissolved oxygen in water has been measured at various acidities as a function of catalyst (cupric ion) concentration. In dilute solutions the oxidation occurs through a cupric ion catalyzed process as well as by an uncatalyzed step. The extent of formation of nitrosodimethylamine ($\text{NDMA}$) depends upon the initial $\text{UDMH}$ concentration. In dilute solutions $\text{NDMA}$ is not formed, but in more concentrated solutions, $\text{NDMA}$ formation increases with increasing $\text{UDMH}$ content, reaches a maximum at 60–80% $\text{UDMH}$ (by volume) and then decreases. The $\text{NDMA}$ yield appears to approximately parallel the viscosity of the medium, and it is speculated that the factors which control viscosity may also be responsible for governing $\text{NDMA}$ formation.     

Toward a high-rate enhanced biological phosphorus removal process in a membrane-assisted bioreactor.

A membrane enhanced biological phosphorus removal (MEBPR) process was studied to determine the impact of hydraulic retention time (HRT) and solids retention time (SRT) on the removal of chemical oxygen demand (COD), nitrogen, and phosphorus from municipal wastewater. The MEBPR process was capable of delivering complete nitrification independent of the prevailing operating conditions, whereas a significant improvement in COD removal efficiency was observed at longer SRTs. In the absence of carbon-limiting conditions, the MEBPR process was able to achieve low phosphorus concentrations in the effluent at increasingly higher hydraulic loads, with the lowest HRT being 5 hours. The MEBPR process was also able to maintain optimal phosphorus removal when the SRT was increased from 12 to 20 days. However, at higher suspended solids concentrations, a substantial increase was observed in carbon utilization per unit mass of phosphorus removed from the influent. These results offer critical insights to the application of membrane technology for biological nutrient removal systems.     

Ultraviolet spectrophotometric determination of nitrate: detecting nitrification rates and inhibition.

Simple methods that rapidly detect nitrification inhibition are needed to enforce pretreatment programs and prevent upsets. The objective of this study was to demonstrate a rapid method for measuring nitrification inhibition by using nitrate generation rates (NGRs) coupled with direct UV detection of nitrate. The NGRs were measured with UV spectrophotometry at wavelengths between 225 and 240 nm, without chemical manipulation, and verified against ion chromatography. The method was shown to quickly and accurately measure nitrate concentrations after correcting for nitrite interference. Cadmium, hypochlorite and 1-chloro-2,4-dintrobenzene (CDNB) were tested for their ability to cause nitrification inhibition using this method. The CDNB was found to cause a correctable interference with the test, while hypochlorite provided an uncorrectable interference. Used as a batch method coupled with biotic and abiotic controls, this approach can be deployed at full-scale treatment plants as a relatively rapid (1.5 hours) means of identifying nitrification-inhibiting wastewaters.     

Activated sludge inhibition by chemical stressors--a comprehensive study.

The effects of shock loads of 1-chloro-2,4-dinitrobenzene (CDNB); cadmium; 1-octanol; 2,4-dinitrophenol (DNP); weakly complexed cyanide; pH 5, 9, and 11; and high ammonia levels on activated sludge biomass growth, respiration rate, flocculation, chemical oxygen demand removal, dewaterability, and settleability were studied. For all chemical shocks, except ammonia and pH, concentrations that caused 15, 25, and 50% respiration inhibition were used to provide a single pulse shock to sequencing batch reactor systems containing a nitrifying or non-nitrifying biomass. Cadmium and pH 11 shocks were most detrimental to all processes, followed by CDNB. The DNP and cyanide primarily affected respiration, while pH 5, pH 9, octanol, and ammonia did not affect the treatment process to a significant extent. A chemical source-process effect matrix is provided, which we believe will aid in the development of methods that prevent and/or attenuate the effects of toxic shock loads on activated sludge systems.     

Simulation of the evolution of particle size distributions in a vehicle exhaust plume with unconfined dilution by ambient air

Over the past several years, numerous studies have linked ambient concentrations of particulate matter (PM) to adverse health effects, and more recent studies have identified PM size and surface area as important factors in determining the health effects of PM. This study contributes to a better understanding of the evolution of particle size distributions in exhaust plumes with unconfined dilution by ambient air. It combines computational fluid dynamics (CFD) with an aerosol dynamics model to examine the effects of different streamlines in an exhaust plume, ambient particle size distributions, and vehicle and wind speed on the particle size distribution in an exhaust plume. CFD was used to calculate the flow field and gas mixing for unconfined dilution of a vehicle exhaust plume, and the calculated dilution ratios were then used as input to the aerosol dynamics simulation. The results of the study show that vehicle speed affected the particle size distribution of an exhaust plume because increasing vehicle speed caused more rapid dilution and inhibited coagulation. Ambient particle size distributions had an effect on the smaller sized particles (approximately 10 nm range under some conditions) and larger sized particles (>2 microm) of the particle size distribution. The ambient air particle size distribution affects the larger sizes of the exhaust plume because vehicle exhaust typically contains few particles larger than 2 microm. Finally, the location of a streamline in the exhaust plume had little effect on the particle size distribution; the particle size distribution along any streamline at a distance x differed by less than 5% from the particle size distributions along any other streamline at distance x.